OSWORD &10

From BeebWiki

OSWORD &10 (16 ) - Network transmit NFS

On entry:
 XY?0   =control byte with b7 set
 XY?1   =destination port
 XY+2..3=destination station
 XY!4   =buffer start address
 XY!8   =buffer end address
 XY!12  =remote address for immediate operations
On exit
 XY?0=zero if transmission failed to start

Transmission must be polled with OSBYTE &32 (50). If the
destination station is &FFFF, a broadcast will be sent, the eight
bytes of data are in the control block at XY+4 to XY+11. If the
port number is zero, an immediate operation is transmitted.

See Also

• http://mdfs.net/Docs/Comp/BBC/Oswords

Networking API Calls OSWORD &10 (NetTx) • OSWORD &11 (NetRx) • OSWORD &12 (NetArgs) • OSWORD &13 (NetInfo) • OSBYTE &32 (NetPollTx) • OSBYTE &33 (NetPollRx) • OSBYTE &34 (NetKillRx) • OSBYTE &35 (NetRoff) Library Calls FNNet_Tx() • FNNet_TxCount() • FNNet_RxOpen() • FNNet_Rx() • FNNet_RxRead() • PROCNet_RxKill() • FNNet_Err() • FNNet_Stn() • FNNet_StnFixed() • FNNet_Info()

Jgharston 13:23, 26 May 2009 (UTC)